Manufacture : GLT Valve
Globe Valve Application
Globe valve are primary used as control valves where throttling or both throttling and shut-off are required. Globe valve can be also be used for on-off service; however, because of the design, a pressure drop becomes inherent. This is generally confined to on-off applications where the valve is normally closed and pressure drop is not important when the valve is open. Globe valve is uni-directional valves and normal applications will find the globe valve with the flow and pressure under the disc. GLT cast steel globe valve are commonly made outside screw and yoke design with full port and heavy-duty type discs.
Manufacturing Standards
Body and Bonnet Connection
Standard body-bonnet joints of globe valves are connected by studs and nuts and are machined as follows:
Standard Part & Material
Note : Other valve material composition are available on special request
CAST STEEL GLOBE VALVE
Manufacture : GLT
Specifications
Design to API 600
Bolted Bonnet
Outside Screw & Yoke
Rising Stem
Rising Handwheel
Swivel Plug Disc
Class 150
Standard Parts & Material
Note : Other valve material composition are available on special request
Dimensions
Working Pressure: Carbon Steel - 285 p.s.i @ 100°F / 38°C
Class 300
Standard Parts & Material
Note : Other valve material composition are available on special request
Dimensions
Working Pressure: Carbon Steel - 740 p.s.i @ 100°F / 38°C
Class 600
Standards Parts & Material
Note : Other valve material composition are available on special request
Dimensions
Working Pressure: Carbon Steel - 1480 p.s.i @ 100°F / 38°C
Class 900
Standards Parts & Material
Note : Other valve material composition are available on special request
Dimension
Working Pressure: Carbon Steel - 2220 p.s.i @ 100°F / 38°C